How to add the item

How to add the item

To add the item

Step 1

If you would like to add the item, the first thing you must do is to use the mouse to select the item that you want to insert. After that, you need to click the right mouse key. Later, just click on the Insert button.

Step 2

Next, you need to adjust the item size and click the Close button.

Step 3

Now, you’ll see that the chair is being pasted in the page.

Edited By: Norasyikin Mahmud

© 2001 Inner Esteem

All rights reserved. All other product names and trademarks are registered properties of their respective owners.

060801

How to add the window

How to add the window

To add the window

Step 1

If you wish to add the window, first, you need to use the mouse to open the Design menu and then open the Door sub menu. Later, just click the Add Door command.

Step 2

After that, just place the insertion point to where you want it to be inserted.

Step 3

Select wall, space boundary or RETURN and finally, insert point.

How to add the door

How to add the door

To add the door

Step 1

To add the door, the first thing you need to do is to use the mouse to open the Design menu and then open the Door sub menu. Later, click the Add Door command.

Step 2

After that, just place the insertion point to where you want it to be inserted.

Step 3

Next, you need to select wall, space boundary or RETURN and finally, insert point.

How to add the wall

How to add the wall

To add the wall

Step 1

If you would like to add the wall, first, you need to use the mouse to open the Design menu. After that, open the Walls sub menu and click the Add Wall command.

Step 2

Next, just place the insertion point to where you want to insert it.

Step 3

Now, use the mouse to specify the start and the end point.

How to create the Electronics

How to create the Electronics

To create the Electronics

Step 1

To create the Electronics, first, you need to use the mouse to open the Design menu and then open the Design Content sub menu. After that, you have to click on the Electrical Services command.

Step 2

You can use the function to create Basic Electronics.

How to create the Kitchens

How to create the Kitchens

To create the Kitchens

Step 1

If you would like to create the kitchen, first, use the mouse to open the Design menu. After that, open the Design Content sub menu. Next, you ought to click on the Kitchen Fittings command.

Step 2

Later, use the item to design the kitchen Fittings.

How to design the Bathroom Fittings with AutoCAD

How to design the Bathroom Fittings with AutoCAD

To design the Bathroom Fittings with AutoCAD

Step 1

If you wish to design the bathroom Fittings with AutoCAD, the first thing you need to do is to use the mouse to open the Design menu. After that, open the Design Content sub menu and click the Bathroom Fittings.

Step 2

Next, use the item to design the Bathroom.

How to modify the polyline

How to modify the polyline

To modify the polyline

Step 1

If you would like to modify the polyline, first, you ought to use the mouse to open the Modify menu and then open the Object sub menu. Later, just click on the Polyline command.

Step 2

In the command window, a message will be displayed. You need to enter an option Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltypegen/Undo.

How to work with Fillet

How to work with Fillet

To work with Fillet

Step 1

To work with Fillet, the first thing you must do is to use the mouse to open the Modify menu and then click the Fillet command.

Step 2

Next, you need to select the object. After that, you have to select the second object and then press the Enter key. Now you could see that the lines are parallel.

How to work with Chamfer

How to work with Chamfer

To work with Chamfer

Step 1

If you would like to work with Chamfer, use the mouse to open the Modify menu and then click the Chamfer command.

Step 2

After that, you need to select the object and then press the Enter key.

How to work with Break

How to work with Break

To work with Break

Step 1

If you would like to work with Break, the first thing you need to do is to use the mouse to open the Modify menu and then click the Break command.

Step 2

Next, select the object and then press the Enter key.

Step 3

After that, you need to specify the second break point.

How to work with Stretch

How to work with Stretch

To work with Stretch

Step 1

If you wish to work with stretch, first, use the mouse to open the Modify menu and then click the Trim command.

Step 2

Soon, select the object and then press the Enter key.

Step 3

After that, select the object to trim or shift-select to extend. You need to make sure that the curve must intersect cutting edges at least twice.

How to work with Scale

How to work with Scale

To work with Scale

Step 1

To work with scale, first, you need to use the mouse to open the Modify menu and then click the Scale command.

Step 2

After that, select the object and then press the Enter key.

Step 3

Later, you need to specify the base point and specify the scale factor or Reference.

How to rotate the object

How to rotate the object

To rotate the object

Step 1

To rotate the object, first you must use the mouse to open the Modify menu and then click the Rotate command.

Step 2

After that, you need to select the object that you want to rotate and then press the Enter key.

Step 3

Next, specify base point. Specify rotation angle or Reference and then press the Enter key.

How to move the object

How to move the object

To move the object

Step 1

If you wish to move the object, first, use the mouse to open the Modify menu and then click the Move command.

Step 2

Now, you need to select the object that you want to move and then press the Enter key.

Step 3

Next, specify the base point or displacement and later, specify the second point of the displacement or use the first point as displacement.

How to work with Mirror command

How to work with Mirror command

To work with Mirror command

Step 1

To work with Mirror command, the first thing you must do is to use the mouse to open the Modify menu and then click the Erase command.

Step 2

Next, you need to select the object and then press the Enter key.

Step 3

After that, specify the first point of mirror line. Later, specify the second point of mirror line. It will ask you whether you would like to delete the source objects or not.

How to work with Copy command

How to work with Copy command

To work with Copy command

Step 1

To work with Copy command, first, use the mouse to open the Modify menu and then click the Erase command.

Step 2

Next, use the mouse to select the object that you want to copy and then press the Enter key.

Step 3

Now, you must specify the base point or displacement and specify the second point of displacement

How to work with Erase command

How to work with Erase command

To work with Erase command

Step 1

To work with Erase command, the first thing you need to do is to use the mouse to open the Modify menu and then click the Erase command.

Step 2

Next, select the object you want to delete.

Step 3

Now, you will see that the selected object being deleted.